So you’re thinking about a flat screen (or you already have one) and now want to consider the advantages of wall mounting it. All the details and the short text are unknown at first, but I’ll do my best to explain what you need to know.
It’s no exaggeration to say that I love HDTV (High Definition TV). If you’re looking for a regular cathode ray tube (CRT) TV, you should look elsewhere. They are deadly, so we won’t cover them in this sentence. HDTVs come in many variations and the main players are LCD, Plasma, Rear Projection and Front Projection. LCD stands for Liquid Crystal Display. If you are looking for service like tv mounting near me, then you are at the right post.
All you need to know is that this is the same technology after the ubiquitous flat panel computer monitor. The focus of this article is on LCD and plasma screens, which are considered flat screens and can be easily mounted on the wall of most devices.
Let’s break down some negative assumptions. LCD technology has been around for a long time and is now developing screens similar to plasma screens. For editing purposes, I will show you some of the differences between LCD and plasma. LCD TVs are almost always lighter than plasma screens.
This makes mounting a bit easier and cheaper as you won’t need an approved bracket for the larger weight. It may not be necessary to support the wall mount insertion point. LCD screens are also easier to transport when moved, and plasma screens are less likely to crack or crack under their weight if not loaded properly.
People looking to go “green” or save on their energy costs, consider LCD screens because they consume less power than a screen larger than plasma screens. There are many differences in the specificity and function of LCD and plasma, but none affect the configuration. The average consumer/hobbyist won’t be able to tell the difference. Personally, I drew on LCD screens. Now that we know what kind of TV we are going to use, we hope to be able to move on to phase.
One of the most frequently asked questions is the size of the TV. The choice of TV size is very important and should not be overlooked. When talking about widescreen, remember that radio is measured diagonally (left to right). Unless otherwise stated, you should always make this assumption when making measurements.
The most important thing to consider is how far away most of your viewers are from the screen. After mounting the TV, most of the screen will be 3 inches from the wall. Measure the distance between the table and the wall where you plan to mount the screen. Add 3 fingers to your quote to count on the bracket you will place on the wall and screen. The thumb width rule for HDTV is that you want the viewer to be about 1.5 to 3 times the size of the widescreen TV (in inches) away from the screen.
Translation: if the TV is 36 inches, the viewer must be at least 54 inches and up to 108 inches from the screen. HDTV screens are designed to be viewed from a distance, so you don’t want them up close. Sitting too close can raise questions about HDTV picture quality and visual acuity. If you are too far from the screen, you cannot see the content level because the eyes cannot see the full resolution of the screen. Seated distances also transformed the “immersion” that HDTV screens had to provide. We recommend sitting in the middle of the recommended view. This should be enough data sizing for any home video/audio enthusiast.
Choosing the right TV stand is not difficult at all. There are so many different things to choose from. The first type of mount I will discuss is the low mount TV, also known as flat mount or flush mount. The mount does not move and holds the TV screen about an inch from the wall. It’s perfect for those looking for a minimal profile and a sleek look on their HDTV display.
This mount allows your TV to flow along walls and reduces clutter in tight spaces or small rooms. It is important to note that for low profile TV mounts you will usually need to remove the TV from the mount to connect/disconnect the cables.
The next type of stand is the tilting TV stand. The tilt mount does exactly what the name suggests and allows you to tilt the screen down in situations where you want to mount the screen higher than you would like to see through the wall. Examples of where these brackets are useful are retail stores, meeting rooms, or bedrooms when you need a good sleeping angle.
There’s a wide range of movement depending on the model, and the average stand has a 15-20 degree tilt, which is usually enough to meet customer needs. Many angled stands are available, so check the specs before you buy.
The third and final mount to discuss is the swivel TV mount, also known as an articulating mount or cantilever mount. The swivel mount can lift the TV away from the wall and rotate the screen in any direction.
A single mounting bracket allows the TV to be placed 5 to 20 inches from the wall and can be rotated up to 60 degrees in either direction. Most swivel mounts also only have a 15-20 degree tilt, just like tilt mounts. Swivel mounts are recommended for those looking for maximum flexibility in adjusting their viewing angles.
Perfect for people who need to adjust their flat screen TV as much as possible. Tilt and swivel mounts provide workspace behind the screen, making them ideal for people who constantly connect different wires to their TVs.
Now that we have the editing style in mind, we need to think about the big screen. When buying a crib, you know it can fit a variety of sizes on the TV. What is that? Most mountable HDTVs conform to the Video Electronics Standards Association or the standard standardized by what is commonly known as VESA. VESA generally refers to mounting holes for TVs and brackets. Most stands and TVs follow this pattern, but check before you buy.
What if I have already purchased a TV that is not VESA compatible? It’s true! There are many grille adapters available in the market that allow you to mount your TV on a VESA compatible bracket. What does it mean? Basically, different TVs use the same mounting holes on the back of the screen to make viewing and adjusting the bracket as easy as possible.
The weight of the TV is also important. The weight of the screen can usually be seen in the user manual or box, and sometimes on the back of the screen. If all else fails, it should be listed on the manufacturer’s website. When looking for a rack, it usually gives the heaviest weight it can hold.
Do not weigh more than recommended! In the worst case, the screen would detach from the wall and fall to the floor, leaving the TV shattered and a hole in the wall. If your TV weighs less than 20 pounds of its heaviest weight, it is always advisable to use a sturdy stand with a heavier weight gauge. The heaviest instructions do not include the weight of the wires connected to the back of the TV screen.
The weight or tension of the metal cannot be ignored! Most people run 2-14 wires through the back of the screen and add that extra load. Remember that people may be tempted to touch or lean into the screen. It also applies force when tilting or rotating the screen to a new position. If you decide to purchase an extra 20 pounds, investing a few extra dollars here can save you hundreds of dollars in the long run.
This information must be used in accordance with the general instructions and always in accordance with the instructions provided. When determining the mounting height of your TV, the best viewing angle is always a straight line (at eye level). If you draw a horizontal line down the center of the TV (don’t draw a line across the screen), those lines should be visible to the viewer.
The tilt stand allows you to mount the screen higher and load height by tilting the screen. The first step is to identify the wall needed for mounting. Regardless of its weight, it is not recommended to install the TV stand alone on drywall only! Drywall cannot support the weight of the screen and can break easily, causing the light to fall to the floor. Your best bet is to identify the studs behind the drywall that can be installed in place.
The bracket can also be installed on brick and stone. This setup is easy because you don’t have to worry about finding studs and the brick/stone itself is strong enough to support the weight. Make sure the mounting hardware goes through the stud. If your home/office uses metal studs instead of wood, we recommend using toggle bolts which are commonly used.
They can be found at your local hardware store or online. Environmental factors must be taken into account. There has been a recent trend to hang flat screens across the fireplace. It looks good, but I found that temperature changes can cause the TV and screens to malfunction. But you can, but first draw the wall/chimney above.